150 Printer Software Settings
Printer Information acquisition
Depending on the configuration of your system, the information
displayed in the Printer and Option Information dialog box may
be updated automatically, or may need to be entered manually.
If a message appears in the Current Settings window prompting
you to enter settings, or if you change the printer configuration,
follow the steps below to make the necessary settings manually.
1. Click Settings Sheet in the Printer and Option Information
dialog box to print out information about your printer and
options. A4 or Letter size paper must be loaded in your printer
to use this utility. You will see a printout similar to the one
below.
2. Make sure the settings in the utility match the information on
the printed Settings Sheet. If they do not match, correct the
settings on the screen to match the information on the settings
sheet.
3. Click OK to exit this menu and save your settings.
Thick paper
Adjusts the size of the gap between the platen and print head.
Select this check box if your printouts are rubbed while printing.
To Next Page
Loading...
