152 Printer Software Settings
Show Progress Meter
To display the progress meter every time you print, select Show
Progress Meter.
Always spool RAW datatype (for Windows XP and 2000)
Select this check box to have Windows NT based clients spool
documents using the RAW format instead of the EMF (metafile)
format (Windows NT based applications use the EMF format by
default).
Try using this option if documents spooled in EMF format do not
print correctly.
Spooling RAW datatype requires less resources than EMF, so
some problems (“Insufficient memory/disk space to print”,
“Slow print speed”, etc.) can be solved by selecting the Always
spool RAW datatype check box.
Note:
When spooling RAW datatype, print progress as displayed by the
progress meter may differ from actual print progress.
Page Rendering Mode (Windows XP and 2000)
Select this checkbox when the print speed is extremely slow or
when the print head stops for a few minutes while printing.
Note:
When using this function, the following problems may occur:
❏ Print progress displayed in the Progress Meter window may differ
from the actual print progress.
❏ Printing may take a longer time to start.
To Next Page
Loading...
