168
Expansion
Using the slider, you can control the amount of the image that
extends beyond the edges of the paper during borderless printing.
For most print jobs, selecting Max is recommended in order to
eliminate margins on all sides of the paper. Moving the slider
towards Min decreases the amount of the image that extends
beyond the edges of the paper; however, as this amount
decreases, margins may begin to appear on one or more sides of
the paper.
Extension Setting
Thick paper
Adjusts the size of the gap between the platen and the print head.
Select this check box if your printouts are rubbed while printing.
Paper Configuration
Select Paper Configuration from the pop-up menu to access the
Color Density and Drying Time per Print Head Pass slide bars.
These allow you to make the following detailed paper settings.
Color Density
Use this to adjust the strength of color density when printing on
non-EPSON media. You can adjust the density by dragging the
scroll bar to the left or right, or by entering a value between -50
and 50 in the text box.
Drying Time per Print Head Pass
Use this to add a waiting time when the print head reaches the
end of every pass to allow the ink to dry. You can adjust the setting
by dragging the scroll bar to the left or right, or by entering a value
between 0 and 50 in the text box.
To Next Page
Loading...
