175
Roll Paper Option The Roll Paper Option settings are only available
when Roll Paper is selected as the Paper Source
setting.
The available settings are described below.
Banner:
Select this mode when you want to print multi-page
data continuously rather than as individual pages.
When this is selected, the Save roll paper check box
is available.
Cut sheet:
Select this mode when you want to print multi-page
data as individual pages, rather than continuously.
When this is selected, the Print page frame check
box is available.
Save roll paper:
Select this check box when you want to save roll
paper. When this is selected, the blank portion of the
last page of your document is not fed through the
printer.
Print page frame:
Select this check box to print a line on the roll paper
between pages in a multi-page document, to
indicate where the paper should be cut. This feature
is useful when it is unclear where the page breaks
should be.
To Next Page
Loading...
