244 Improving Print Quality
3. Click Configuration. The Configuration Settings dialog box
appears.
In the Configuration Settings dialog box, you can make the
following settings.
Error notification Choose the method by which EPSON
StatusMonitor will notify you in case of an error.
Warning Choose the method by which EPSON
StatusMonitor will notify you if a warning
message becomes necessary.
Temporary Spool folder Specify the folder in which print data will be
temporarily spooled.
Temporary High Speed
Copies folder
Specify the folder in which multiple-copy print
data will be temporarily stored.
Data will be sent to the
printer after being stored
on your disk.
Select this check box to prevent horizontal
banding in printouts that contain images, by
temporarily storing image data on the
computer’s hard drive. The computer will then
send the image data to this product as a
whole rather than as rectangular bands.
Check for errors before
starting to print.
Select this check box to have this product
check for errors before starting to print.
Check the ink level
before starting to print.
Select this check box to have this product
check the ink levels before starting to print.
To Next Page
Loading...
