316
Disable EPSON Status Monitor 3
Select this checkbox to disable printer status monitoring with
EPSON Status Monitor 3.
Always spool RAW datatype (Windows XP and 2000)
Select the Always spool RAW datatype checkbox to have
Windows NT-based clients spool documents using the RAW
format instead of the EMF (metafile) format (Windows NT-based
applications use the EMF format by default).
You can also use this option if documents spooled in EMF format
do not print correctly or if you have insufficient memory or disk
space problems.
Note:
When spooling RAW datatype, print progress displayed by the Progress
Meter may differ from the actual print progress.
Page Rendering Mode (Windows XP and 2000)
Select this checkbox when the print speed is extremely slow or
when the print head stops for a few minutes while printing.
Note:
When using this function, the following problems may occur:
❏ Print progress displayed in the Progress Meter window may differ
from the actual print progress.
❏ Printing may take a longer time to start.
Print as Bitmap (Windows XP and 2000)
Select this checkbox when the print speed is extremely slow or
when the print head stops for a few minutes while printing. Try
this option if Always spool RAW datatype and Page
Rendering Mode do not solve the problem.
To Next Page
Loading...
