80 Various Printing Options
Note:
The actual binding margin may be different from the specified
settings depending on your application. Experiment with a few
sheets to examine actual results before printing the entire job.
11. Click OK to return to the Page Layout menu. Then, click OK
to save your settings.
12. Load paper into the sheet feeder, then send the print job from
your application. Instructions for generating the
even-numbered pages will be displayed while the
odd-numbered pages are printed.
“Loading single sheets of paper” on page 346
13. Follow the on-screen instructions to reload the paper.
Note:
❏ The paper may curl during printing due to the amount of ink
used. Should this occur, slightly curl the sheets in the opposite
direction before reloading them into the printer.
❏ Align the sheet stack by tapping its edges against a hard, flat
surface before reloading the stack into the printer.
❏ Follow the instructions provided when reloading the printouts.
Paper jams or improperly placed binding margins may occur if
the printouts are not reloaded correctly.
To Next Page
Loading...
