90 Various Printing Options
10. Make the appropriate Media Type setting.
“Media type settings” on page 369
11. Load paper into the sheet feeder, then click Print to start
printing. Instructions for printing the inside pages will be
displayed while the outside pages are printed.
“Loading single sheets of paper” on page 346
12. Follow the on-screen instructions to reload the paper.
Note:
❏ The paper may curl during printing due to the amount of ink
used. Should this occur, slightly curl the sheets in the opposite
direction before reloading them into the printer.
❏ Align the sheet stack by tapping its edges against a hard, flat
surface before reloading the stack into the printer.
❏ Follow the instructions provided when reloading the printouts.
Paper jams or improperly placed binding margins may occur if
the printouts are not reloaded correctly.
❏ If a paper jam occurs, refer to the following.
& See “The paper jams” on page 283
13. Once the paper is reloaded, click Resume to print the inside
pages.
To Next Page
Loading...
