Replacing Ink Cartridges 135
6. Insert the new cartridge into the holder. Press down firmly until it clicks into
place.
If you need to replace other ink cartridges, repeat steps 4 through 6 before
continuing with step 7.
7. Close the cartridge cover, then lower the scanner unit.
Caution:
If you find it difficult to close the cover, make sure all the cartridges are firmly
seated. Press down on each newly installed cartridge until you hear it click into
place. Do not attempt to force the cover closed.
The Stylus Photo RX600 begins charging the ink delivery system and the Ink
Charging
message appears on the RX600 screen. When you see the Ink
cartridge replacement completed
message, click OK.
Caution:
Never turn off the Stylus Photo RX600 while Ink Charging appears on the RX600
screen, unless the Stylus Photo RX600 hasn’t moved or made noise for more than
5 minutes. This may cause incomplete charging of ink.
sprx600usersguide.book Page 135 Wednesday, February 25, 2004 1:47 PM
To Next Page
Loading...
