114
Parent topic: Creating Custom Paper Settings
Edit Media Settings Options
You can select the following options on the Edit Media Settings screen.
Setting Description
Media Setting Name Change the media name
Media Type Set a paper category and paper type; the new media type can
be selected in the printer driver and on the LCD screen
Platen Gap Set the distance between the print head and the paper;
choose a wider setting if prints are frequently scratched or
smudged
Drying Time Set the drying time for each print head pass or for each page
Roll Tension Adjust the roll tension setting if paper gets wrinkled during
printing
Paper Suction Select to adjust the printer's suction setting; choose lower
values for thinner papers
Skew Reduction Select to reduce paper skew
Paper Thickness Set the thickness of the paper
ICC Profile Set an ICC profile for the media type
Select an RGB Profile when printing using the printer driver or
select an RGB Profile or CMYK Profile when printing using a
software RIP
PS unit print settings Set the print settings to use when printing using the Adobe
Embedded Print Engine
Roll Core Diameter Select the paper core size for the loaded roll paper
Paper Feed Offset Select the amount of offset necessary to reduce banding on
uneven color in printouts
Paper Size Check Select On to automatically detect the paper width when paper
is loaded
Select Off when the paper roll is empty. This allows you to set
the paper width before feeding the paper.
To Next Page
Loading...
