203
• SureColor T7770D: For Print Quality, select Select Target, and then select CAD/Line Drawing -
Black, CAD/Line Drawing - Color, or CAD/Line Drawing - Bi-Level.
Note: Available settings depend on the selected media type.
9. Select any other printing settings as necessary and click OK.
10. Start printing your drawing from the CAD software.
Parent topic: Printing CAD Drawings
Printing CAD Drawings in HP-GL/2 or HP RTL Mode
You can change settings in your product's control panel to print CAD drawings using HP-GL/2
(compatible with the HP Designjet 750C) or HP RTL mode. This printing method is best for maps and
blueprints, or when lines need to be emphasized.
Note: The product emulates HP-GL/2 or HP RTL commands. Not all HP-GL/2 and HP RTL features are
supported on the product.
To Next Page
Loading...
