205
You see this screen:
6. Change the settings as necessary.
7. Select the left arrow to return to the previous screen.
8. Select Printing Language.
• If you are printing over USB, select USB and change the Printing Language setting to HP-GL/2.
• If you are printing over a network, select Network and change the Printing Language setting to
HP-GL/2.
Note: Make sure you return the Printing Language setting to Auto when you are done printing in
HP-GL/2 mode.
9. Open the file you want to print in your CAD software.
10. Click Plot and select your product as the printer.
11. Start printing your drawing from the CAD software.
Parent topic: Printing CAD Drawings
Printing from a Shared Folder
You can select and print a file from a shared network folder.
To Next Page
Loading...
