151
You see a screen like this:
3. Select the paper source you want to select settings for, then select the following settings depending
on your paper source selection:
• Roll 1/Roll 2:
Select Change Paper Type > Paper Type and select the type of paper you loaded, then select
Paper Width and select the width of the loaded paper.
• Cut Sheet/Poster Board:
Select Change Paper Type/Paper Size > Paper Type and select the type of paper you loaded,
then select Paper Size and select the size of the loaded paper.
4. Select the home icon to exit.
Paper Type Settings - Control Panel
Parent topic: Media Handling
Paper Type Settings - Control Panel
Select a Paper Type setting that matches the paper you loaded. If you do not see your paper type listed,
select Others in the menu.
Paper type loaded Paper Type setting
Plain paper 16 to 20 lb (60 to 75 g/m
2
) Plain Paper
Coated paper (generic) Coated Paper (Generic)
To Next Page
Loading...
