338
Solving Paper Problems
Check these sections if you have problems using paper with your product.
Paper Feeding Problems
Roll Paper Jam Problems
Cut Sheet Paper Jam Problems
Paper Does Not Collect in the Basket or is Creased
Parent topic: Solving Problems
Paper Feeding Problems
If you have problems feeding paper, try these solutions:
• Make sure paper is loaded in the correct orientation. Load cut sheets vertically (short edge first).
• For best results, follow these guidelines:
• Use new, smooth, high-quality paper that is not damp, curled, creased, old, too thin, or too thick.
• Follow any special loading instructions that came with the paper.
• If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
Then reload the paper.
• If you cannot insert paper easily into the paper feed slot, make sure the paper is perfectly flat and not
curled.
• Do not load more than one piece of cut sheet paper.
• Make sure your paper meets the specifications for your product.
To Next Page
Loading...
