210
Switching Rolls According to Paper Type
If you frequently use different paper types for different purposes, such as printing drawings for review on
plain paper and printing drawings for submission on colored paper, you can set the printer to
automatically switch to the roll that has the same paper type as the print job.
1. Load different types of paper with the same paper width into Roll 1 and Roll 2.
2. Select > General Settings > Printer Settings > Paper Source Settings > Roll Paper Setup >
Roll Switching > Auto > Paper Type from the printer’s control panel.
3. Select Type Match.
Note: Select Disable to print even if the paper loaded in the printer and the paper type selected in
the driver are different.
4. Choose from the following:
• Windows: Display the printer driver's Printer Settings screen, and then select Roll Auto as the
Source setting.
To Next Page
Loading...
