307
9. Close the port cover.
10. Select Done to return the print head to its home position.
Parent topic: Maintenance and Transportation
Related tasks
Removing Roll 1
Removing Roll 2
Cleaning the Print Head Cap Area
If the print head is clogged and automatic cleaning does not fix the issue, you can clean the print head
and the area around the caps using the optional cleaning sticks (part number C13S090013)
Caution: Before beginning the cleaning process, note the following:
• Do not touch any circuit boards or any parts inside the printer besides those which need to be cleaned.
• Always use new cleaning sticks, or dirt may be transferred into the printer.
To Next Page
Loading...
