236
Setting Options Description
Paper Eject Roller Auto
Use
Do Not Use
Select to control the paper ejection roller;
select Auto to use the roller automatically
depending on the type of Epson paper; select
Use to always use the roller to eject paper;
select Do Not Use when you are concerned
about damaging the print surface
Paper Feed Offset –1.0 to 1.50% Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.
Restore Default Settings — Restores advanced media settings to their
default values; not available with custom
paper types
Caution: If the Paper Size Check setting is set to Off, the printer may print beyond the edges of the
paper, causing ink to get on the printer.
Poster Board menu
Setting Options Description
Remove — Ejects the loaded poster board
To Next Page
Loading...
