248
Setting Options Description
Page Margins option Clip By Margins Adds the page margin value inside the
hard clip area of the PS command of the
data, or the size selected for the Base
Output Size . Any print object in the
margin area is clipped and not printed.
Oversize Adds the page margin value outside the
hard clip area of the PS command of the
data (when Auto is selected), or outside
the size selected for the Base Output
Size (when set to a standard size)
Page Margin 3 mm
5 mm
Select the top, bottom, left, and right
margin values for roll paper
Note: Margins are 3 mm for cut sheets
regardless of the setting.
Smoothing On
Off
Select On to print at the maximum
resolution for the selected paper type
Note: This may result in longer printing
time or insufficient memory errors.
Base Output Size Various options When Auto (default) is selected, the hard
clip area of the PS command of the data
becomes the base output size
Select User-Defined when printing in a
custom size
Resolution Standard
300 dpi
600 dpi
1200 dpi
Selects the print resolution; when
Standard (default) is selected, available
resolutions depend on the selected paper
type
To Next Page
Loading...
