28
• Certain Maintenance Settings
• System Administration settings
• Web Config settings
• EpsonNet Config settings
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance. For more information on administration settings, see the online
Administrator's Guide.
1. Select the home icon, if necessary.
2. Select the icon.
3. Select General Settings > System Administration > Security Settings > Admin Settings.
You see a screen like this:
4. Select Admin Password > Change.
5. Do one of the following:
• If you have set an administrator password before, enter the current password, then enter and
confirm the new password in the fields provided.
To Next Page
Loading...
