64
• If you want to be notified when paper is low, select Remaining Alert and enter an amount.
Note: When you enable Remaining Amount Management, the printer prints a barcode on the
leading edge of the roll when you remove the roll paper. When you reload the paper, the printer
reads the barcode and automatically sets the paper type and amount remaining.
16. Select Advanced Paper Settings and set any additional settings, if necessary.
17. Select OK when you are finished.
The paper will automatically feed into the printer.
18. If Roll Paper Setup > Auto Loading > Off is selected in the Printer Settings menu, or if the roll
paper doesn't feed automatically, do the following to manually feed the paper:
• Gently turn the paper roll and guide the leading edge of the paper into the paper feed slot. Make
sure the roll paper is taut and the leading edge is not folded.
To Next Page
Loading...
