Epson SureLab D3000 - Double Roll - The printer sounds like it is printing, but nothing prints; The print outs are not what you expected

Settings/Maintenance
39
F
The following screen is displayed after printing
the first sheet. Follow the on-screen
instructions, and then click OK.
The charts the second sheet and after are
printed.
G
Wait for 30 minutes until drying is complete.
Check the the drying time displayed on Status.
When the drying time reaches 0, Drying
complete. is displayed, and the Measure Color
button becomes available.
When the printed chart is dry, perform color
measurement.
Operations may differ depending on the color
measurement device you use.
U “Correction chart color measurement (for
the "i1Pro")” on page 40
U “Correction chart color measurement (for
the "i1iSis")” on page 42