35
Checking the Feeding Position
If Speed or Quality (Mode1) is specified for the Print Quality, it may not be possible to read
the barcodes/2-dimensional symbols if they are printed straddling the feeding position. Adjust
the print data so that they are not straddling the feeding position. It is not necessary to check
the feeding position or adjust it if Quality (Mode2) is specified for the Print Quality because
the feeding position does not affect the reading accuracy of barcodes/2-dimensional symbols.
You can use Print Preview of the General tab to check an image of the print results before
printing. The feeding position is not displayed if Quality (Mode2) is specified for the Print
Quality.
Feeding position
Feeding is
straddled
To Next Page
Loading...
