Epson TM-C3500 Series - Die-Cut Label (Gaps) and Roll Paper

68
Die-cut Label (Gaps) and Roll Paper
When Borderless Printing Enabled
Margins at top, bottom, right, and left (inside label): 0 mm (typical value)
Q Note
The maximum value of the print area width is 104 mm.
Backing paper width
0.5 to 1.0 mm
15.0 mm or more*1
1.5 mm
Waste part
Auto cut position
Auto cut position
Paper feed
direction
Print area
Print area width
2.0 mm
2.0 mm
Waste part
Label
1.5 mm
3.0 mm
Paper width
center
Backing paper
18.0 mm or more*2
Perforation position
*1: When not auto cutting,
8.0 mm or more
*2: When not auto cutting,
11.0 mm or more