52
Die-cut label (Gap)
Paper type Plain paper label / matte paper label / synthetic paper label /
glossy paper label
Form Roll paper
Backing paper width 30 to 112 mm
Label width 25.4 to 108 mm
Label length 8 to 1117.6 mm
Gap between labels 3 to 6 mm
Waste part on the left and right 2 ± 0.5 mm
Label corner R 1.5 mm or less
Paper thickness Plain paper label / matte paper label / synthetic paper label:
0.129 to 0.195 mm
Glossy paper label:
0.184 mm
Roll paper core Plain paper label / synthetic paper label:
Outer diameter: 44.1 mm or more
Matte paper label / glossy paper label:
Outer diameter: 56.8 mm or more
Outer diameter Max. 101.6 mm
Winding direction Printing surface must be facing outside.
Label width
Backing paper width
Gap between labels
Corner R
Label length
Backing paper
Label
Waste part
Waste part
To Next Page
Loading...
Need help?
General