Epson TM-C3500 Series Developer's Guide

91
Efficiently Setting up Multiple Printers
This section describes the procedures for efficiently setting up multiple printers.
The following software is required for the administrator's computer.
• Printer driver
• EPSON Deployment Tool
Perform setup by following the procedures below.
1
Obtain the PrinterSetting settings file and network information such as the
IP address if using a network computer.
2
Register the settings file and network settings in the Printer Deployment of
the EPSON Deployment Tool. For registration procedures, refer to the user’s
manual included with the EPSON Deployment Tool.
3
Connect the printer and select Settings from the EPSON Deployment Tool
list, and then click Start Setup. Printer and network settings are completed
automatically.
Setting up of the printer is now complete. If setting up multiple printers, return to procedure 3
and perform the procedures again.
For set-up procedures following these, refer to the user’s guide.

Epson TM-C3500 Series Specifications

General

Brand	Epson
Model	TM-C3500 Series
Category	Printer
Language	English