65
When Borderless Printing Disabled
Margins at top, bottom, right, and left: 1.5 mm (typical value)
c IMPORTANT
Adjust the issuing interval (Pm) and perforated line interval so that the
relationship becomes as shown below.
Pm = Ph x integral multiple
Paper width
0.5 to 1.0 mm
12.0 mm or more*1
Issuing interval (Ph)
1.5 mm
Auto cut position
Auto cut position
Paper feed
direction
Print area
Print area width
1.5 mm
1.5 mm
1.5 mm
1.5 mm
Perforated line interval (Pm)
Perforated line
Auto cut position
Perforated line
Paper width
center
1.5 mm
Paper
Black mark position
(back side)
*1: When not auto cutting, 5.0 mm or more
*2: When not auto cutting, 8.0 mm or more
15.0 mm or more*2
To Next Page
Loading...
