Setting Description
Security Level: Select the security level.
If the Security Level is WEP-64bit(40bit) or WEP-128bit(104bit):
Setting Description
Input using hex Check the checkbox choosing the WEP Key to be input as a hexadecimal
number.
WEP Key: The WEP Key length varies depending on the Security Level.
For WEP-64bit(40bit), ASCII 5 characters
For Hex WEP-64bit(40bit), 10 places
For WEP-128bit(104bit), ASCII 13 characters
For Hex WEP-128bit(104bit), 26 places
Key Index: Select the key index.
H
When the communication mode is Infrastructure, the Wi-Fi network settings are as follows. When finished
configuring the settings, go to step 9.
Setting Description
Communication Mode:
Select Infrastructure.
SSID: Set the SSID.
The maximum is 32 alphanumeric characters.
TM-P20 Software Installer Software User's Manual
Installation
18