Epson TM-T20 - Character Specifications

24
Character Specifications
Note:
*: Space between characters is not included.
Characters can be scaled up to 64 times as large as the standard size.
80 mm width
paper setting
58 mm width
paper setting
Number of characters Alphanumeric characters: 95
Extended graphics: 128 × 43 pages
(including user-defined page)
International characters: 18 sets
Character structure Normal
mode (initial
setting)
Font A 12 × 24 (including 2-dot horizontal spacing)
Font B 9 × 17 (including 2-dot horizontal spacing)
42 column
mode
Font A 13 × 24 (including 3-
dot horizontal
spacing)
9 × 17 (including 2-
dot horizontal
spacing)
Font B 9 × 17 (including 2-
dot horizontal
spacing)
12 × 24 (including 2-
dot horizontal
spacing)
Character size*
(Standard/Double-height/
Double-width/
Double-width, double-height)
Normal
mode (initial
setting)
Font A 1.25 × 3.00 mm/1.25 × 6.00 mm/
2.50 × 3.00 mm/2.50 × 6.00 mm
Font B 0.88 × 2.13 mm/0.88 × 4.26 mm/
1.76 × 2.13 mm/1.76 × 4.26 mm
42 column
mode
Font A 1.25 × 3.00 mm/
1.25 × 6.00 mm/
2.50 × 3.00 mm/
2.50 × 6.00 mm
0.88 × 2.13 mm/
0.88 × 4.26 mm/
1.76 × 2.13 mm/
1.76 × 4.26 mm
Font B 0.88 × 2.13 mm/
0.88 × 4.26 mm/
1.76 × 2.13 mm/
1.76 × 4.26 mm
1.25 × 3.00 mm/
1.25 × 6.00 mm/
2.50 × 3.00 mm/
2.50 × 6.00 mm