64
Utilities
*: See the following sections in Chapter 2;
∗ Setting IP Address Using EPSON TMNet WinConfig
∗ Setting IP Address Using arp/ping Command
∗ Checking/Changing the Settings
∗ Initializing
∗ ESPON TMNet WebConfig
Software Manual
TM-T20 Utility:
Use for the following functions:
• Checking current settings
• Operation check
• Storing logos
• Automatic paper cut settings
• Printing control settings
• Font settings
• Optional buzzer settings
• Communication I/F settings
• Backup/restore
• TM-T20 Software User’s Manual
• TM-T20 Utility User’s Manual
EPSON TM Net WinConfig:
Use for IP address setting.
• TM Net WinConfig User’s Guide
• UB-E03 Technical Reference Guide*
EpsonNet Simple Viewer:
Use for checking the status of EPSON printers
connected to a network and EPSON TM/BA printers
connected to computers on a network.
EpsonNet Simple Viewer User’s Manual
TM/BA/EU Printer Remote Configuration Tool:
This is a package of EpsonNet Simple Viewer and
TM-T20 Utility. First install this software in the computer
with the administrator's authority, and set up the
firewall. Next, install the printer driver in each client
computer and set up the firewall. Then you can
check the status of and configure the printer
connected to a client computer on the network
from the computer with the administrator's authority.
TM/BA/EU Printer Remote Configuration Tool
User’s Manual
To Next Page
Loading...
