Chapter 4 Handling
75
4
Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper
1
Press the cover open lever to open the roll paper cover.
2
Remove the used roll paper core, if any.
CAUTION
• Do not open the roll paper cover during printing or autocutting.
The printer may be damaged.
• Do not touch the manual cutter with your hands when installing or replacing the
roll paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
• Use roll paper that meets the printer specification. For details about paper specification,
see "Paper Specifications" on page 25.
• Paper must not be pasted to the roll paper spool.
Cover open lever
To Next Page
Loading...
