2. Connect the computer to the network.
Note: To set up a network connection, if necessary, see the documentation supplied with your
computer or network adapter.
3. Install the wireless LAN unit in the projector, if necessary. See the User's Guide supplied with the
projector for more details.
4. Turn on the projector.
5. Press the Menu button on the remote control or the control panel, select the Network menu, and
select Network Configuration.
6. Select Wireless LAN.
A screen like one of the following is displayed.
7. Select On for Wireless LAN Power.
8. Select Advanced for Connection Mode.
9. Select other options as necessary for your network. See the User's Guide supplied with the projector
for more details.
10. Select security settings on the Security menu as necessary for your network. Check with your
network administrator for more information on making the correct settings.
19
To Next Page
Loading...
Need help?
General
