2. If you are connected to multiple projectors, click the button on the toolbar and select the
projector you want to control.
3. Perform one of the following operations.
• Stop: Click the button on the toolbar.
The projected image stops. A black screen is projected while stopped.
• Pause: Click the button on the toolbar.
The projected image pauses. The paused image is projected.
• A/V Mute: Click the button on the toolbar, and then click the button on the toolbar
that is displayed.
The audio and video turn off. The logo set for the projector is projected while using A/V Mute, if
available.
4. To return to the projected image, perform one of the following operations.
• Stop or Pause: Click the button on the toolbar.
• A/V Mute: Click the button again.
Parent topic: Controlling the Projected Display
Switching the Input Source
When another signal is being input to the projector while projecting over a network, you can change the
input source from the toolbar.
43
To Next Page
Loading...
Need help?
General
