Solutions When the Screen is Not Projected Properly
If the screen is not projected or there are problems with the project images try the following solutions.
• When sending movies, use Advanced Connection Mode or set the Wireless LAN system to 802.11a to
use Quick Connection Mode. Depending on the electromagnetic wave environment, the image and
sound for movies may stop.
• If you are using an Microsoft Office application, stop moving the mouse pointer. If you move the
mouse pointer continuously, the screen may not be refreshed quickly.
• If the mouse pointer flickers, try the following solutions.
• Select Make the movement of the mouse pointer smooth on the General settings tab from Set
options.
• Clear Transfer layered window on the Adjust performance tab from Set options.
• The Media Player movie play back screen may not be projected depending on the computer.
• The screen saver preview may not be projected properly depending on the computer.
• If you are connected to multiple projectors, the screen transfer speed may decrease.
• When WEP encryption is enabled, the screen transfer speed may decrease.
Parent topic: Solving Problems During Projection
Related references
Set options - General settings
Set options - Adjust performance
Solutions When There is No Audio
If there is no audio coming from the projector, try the following solutions.
• Audio can only be transferred to one projector. When mutliple projectors are connected to one
computer, disconnect other projectors and try again.
• Select Output audio from the projector on the Audio Output tab from Set options.
Parent topic: Solving Problems During Projection
Related references
Set options - Audio Output
74
To Next Page
Loading...
Need help?
General
