Toolbar
After EasyMP Network Projection starts and a connection is made with the projector, the toolbar is
displayed on the computer screen. You can use this toolbar to operate and make settings for the
projector, and to disconnect the network connection.
Displays the Select target projector screen.
Click to limit the projectors operated from the toolbar when projecting from multiple
projectors using the distribution function or multi-screen display function.
Select target
projector
The text below the icon indicates the projectors that can be controlled. ALL
indicates that all of the connected projectors can be controlled. For example, when
"1, 3" is displayed, projectors No. 1 and No. 3 can be controlled.
Stops projection while connected to the projector. A black screen is projected
while stopped.
Stop
Releases Stop or Pause.
Show
Pauses projected images while connecting to the projector.
Pause
Switches Presentation Mode between enabled/disabled.
Presentation Mode
Displays the Projector control toolbar.
Click to turn the video and audio on or off, or switch the input source.
Projector control
95
To Next Page
Loading...
Need help?
General
