Connecting to the Projector and Projecting Images
Follow these instructions to connect the computer and the projector over a network, and to project
images from your computer's screen using the projector.
Make sure you have already set up EasyMP Network Projection and selected a connection mode for the
projector.
Connection Methods
Changing the Projector Search Method
Controlling the Projected Display
Finishing Projecting Images
Related topics
Installing the Software
Setting Up the Projector
Connection Methods
You can select a suitable method to connect the computer and the projector over a network depending
on your network environment.
Connecting the Projector and a Computer Directly Using Wireless Communication
Connecting the Projector and a Computer over a Network System (Wireless)
Connecting the Projector and a Computer over a Network System (Wired)
Parent topic: Connecting to the Projector and Projecting Images
Connecting the Projector and a Computer Directly Using Wireless Communication
When your projector is set up as indicated below, you can connect the projector and a computer directly
using wireless communication to project the computer's screen.
• The wireless LAN unit is installed in the projector.
• The projector's connection method is set to Quick.
Note:
• When you connect the projector and a computer directly using wireless communication, the
connection between the computer and an access point is disconnected.
• Make sure you turn on your computer's wireless communication function.
22
To Next Page
Loading...
Need help?
General
