You see a screen like this:
5. Select the date format you want to use.
6. Use the numeric keypad to enter the current date and press the OK button .
7. Select the time format you want to use and press the OK button.
8. Use the numeric keypad to enter the current time and press the OK button.
9. Select Date/Time Settings and press the down arrow button.
10. Select Daylight Saving Time and press the OK button.
11. Select the setting that applies to your area:
• Winter: it is winter or your region does not use Daylight Saving Time (DST)
• Summer: it is spring or summer and your region uses Daylight Saving Time (DST)
Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the
season. When you change from Winter to Summer, your product automatically sets its clock ahead
one hour. When you change from Summer to Winter, it sets its clock back one hour.
12. If necessary, select Time Difference and use the icons on the screen to set the difference between
UTC (Coordinated Universal Time) and your time zone.
Parent topic: Setting Up Fax Features Using the Product Control Panel
Using the Fax Setup Wizard
You can set up the product's basic fax settings using the Fax Setting Wizard. This wizard is automatically
displayed when the product is turned on for the first time. You can also change these settings individually
from the Fax Settings menu.
1. Press the home button, if necessary.
125
To Next Page
Loading...
Need help?
General
