379
Entering a User ID and Password for Scanning
Solving Copying Problems
Check these solutions if you have problems copying with your product.
Product Cannot Copy
Product Makes Noise, But Nothing Copies
Product Makes Noise When It Sits for a While
Parent topic: Solving Problems
Product Cannot Copy
If your product cannot make copies, try these solutions:
• If user restriction has been enabled, you may need to enter a user name and password. Contact your
administrator for assistance.
• If the product has an error, such as a paper jam, you cannot make copies. Check the LCD screen for
any errors, and follow the onscreen instructions to clear the error.
Parent topic: Solving Copying Problems
Related references
Paper Jam Problems
Related tasks
Setting User Feature Restrictions (Access Control)
Product Makes Noise, But Nothing Copies
If your product makes a noise, but nothing copies, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• If the nozzle check page does not print, but the product's power is on, make sure your product
software is installed correctly.
• Make sure your product is level (not tilted).
Parent topic: Solving Copying Problems
Related tasks
Checking the Nozzles Using the Product Control Panel
Cleaning the Print Head Using the Product Control Panel
To Next Page
Loading...
Need help?
General
