Epson WF-C5290 Series - Installing the Optional Paper Cassette Units

Installing the Optional Paper Cassette Units
!
Caution:
❏ Make sure you turn
o
the printer, unplug the power cord from the printer, and disconnect any cables before
starting installation. Otherwise, the power cord may be damaged resulting in re or electric shock.
❏ When liing the printer, place your hands in the positions shown below. If you li the printer holding other
positions, the printer may fall or you may trap your
ngers
when placing the printer.
1. Turn o the printer by pressing the P button, and then unplug the power cord.
2. Disconnect any connected cables.
3. Remove the optional paper cassette unit from its box, and then remove any protective materials.
4. Place the optional paper cassette unit where you want to set up the printer.
5. Lower the printer onto the optional paper cassette unit.
User's Guide
Appendix
131