Top
Oset
in Back:
Adjust the top margin for the back of the page when performing 2-sided printing.
Left Oset in Back:
Adjust the le margin for the back margin of the page when performing 2-sided printing.
Check Paper Width:
Select On to check the paper width before printing. is prevents printing beyond the edges of
the paper when the paper size setting is incorrect, but this may lower the print speed.
Skip Blank Page:
Skips blank pages in the print data automatically.
PDL Print Conguration:
Select the PDL Print Conguration options you want to use for PCL or PostScript printing.
Common Settings:
❏ Paper Size
Select the default paper size for PCL or PostScript printing.
❏ Paper Type
Select the default paper type for PCL or PostScript printing.
❏ Orientation
Select the default orientation for PCL or PostScript printing.
❏ Quality
Select the print quality for PCL or PostScript printing.
❏ Ink Save Mode
Select On to save ink by reducing the print density.
❏ Print Order
Last Page on Top:
Starts printing from the rst page of a le.
First Page on Top:
Starts printing from the last page of a le.
❏ Number of Copies
Set the number of copies to print.
❏ Binding Margin
Select the binding position.
❏ Auto Paper Ejection
Select On to eject paper automatically when printing is stopped during a print job.
❏ 2-Sided Printing
Select On to perform 2-sided printing.
User's Guide
Preparing the Printer
35