PCL Menu:
❏ Font Source
Resident
Select to use a font preinstalled on the printer.
Download
Select to use a font you have downloaded.
❏ Font Number
Select the default font number for the default font source. e available number
varies depending on the settings you made.
❏ Pitch
Set the default font pitch if the font is scalable and of xed-pitch. You can select from
0.44 to 99.99 cpi (characters per inch), in 0.01 increments.
is item may not appear depending on the font source or font number settings.
❏ Height
Set the default font height if the font is scalable and proportional. You can select from
4.00 to 999.75 points, in 0.25 increments.
is item may not appear depending on the font source or font number settings.
❏ Symbol Set
Select the default symbol set. If the font that you selected in the font source and the
font number setting is not available in the new symbol set setting, the font source and
the font number settings are automatically replaced with the default value, IBM-US.
❏ Form
Set the number of lines for the selected paper size and orientation. is also causes a
line spacing (VMI) change, and the new VMI value is stored in the printer.
is
means that later changes in the page size or orientation settings cause changes in the
Form value based on the stored VMI.
❏ CR Function
Select the line feed command when printing with a driver from a specic operating
system.
❏ LF Function
Select the line feed command when printing with a driver from a specic operating
system.
❏ Paper Source Assign
Set the assignment for the paper source select command. When 4 is selected, the
commands are set as compatible with the HP LaserJet 4. When 4K is selected, the
commands are set as compatible with the HP LaserJet 4000, 5000, and 8000. When
5S is selected, the commands are set as compatible with the HP LaserJet 5S.
PS3 Menu:
❏ Error Sheet
Select On to print a sheet showing the status when an error occurs during PostScript
or PDF printing.
❏ Coloration
Select the color mode for PostScript printing.
User's Guide
Preparing the Printer
36
To Next Page
Loading...
Need help?
General
