Epson WorkForce DS-32000 - Page 103

Note:
You can also start Epson Scan 2 from Document Capture Pro. For detailed information on how to use Document
Capture Pro, refer to the following URL:
https://support.epson.net/dcp/
3.
On the Main Settings tab, select On(Continuous) in Automatic Feeding Mode.
Note:
You can specify timeout settings to exit Automatic Feeding Mode(Continuous).
Select Settings in the Document Source list to open the Document Source Settings window. On the displayed window,
set the Automatic Feeding Mode Timeout (minutes).
4.
Specify other settings for scanning in the Epson Scan 2 main window.
5.
en click Scan.
Automatic Feeding Mode starts.
Scanning > Scanning by Manual Feed in Automatic Feeding Mode(Continuous)
103