Related Information
& “Checking and Cleaning the Print Head” on page 99
Colored Banding Appears at Intervals of Approximately 3.3 cm
❏ Select the appropriate paper type setting for the type of paper loaded in the printer.
❏ Align the print head using the Print Quality Adjustment feature.
❏ When printing on plain paper, print using a higher quality setting.
Related Information
&
“List of Paper Type” on page 31
&
“Adjusting the Print Quality” on page 121
Blurry Prints, Vertical Banding, or Misalignment
Align the print head using the Print Quality Adjustment feature.
Related Information
& “Adjusting the Print Quality” on page 121
Print Quality Does Not Improve Even After Aligning the Print Head
During bidirectional (or high speed) printing, the print head prints while moving in both directions, and vertical
lines may be misaligned. If print quality does not improve, disable the bidirectional (or high speed) setting.
Disabling this setting may slow down printing speed.
User's Guide
Solving Problems
123
To Next Page
Loading...
Need help?
General