4. Check that the paper size label matches the size of the paper loaded in the paper cassette. If it does not match,
remove the holder and change the paper size indicated on the label.
5. Insert the paper cassette all the way.
6. When loading a paper type that
diers
from the last time, set the paper type on the control panel.
Press the
button, select the paper cassette in which you loaded the paper, and then set the paper type.
Note:
You also need to set the paper size when loading paper other than the following sizes.
A3, B4, A4, B5, A5, B6, A6
Related Information
& “Paper Handling Precautions” on page 25
& “Available Paper and Capacities” on page 22
&
“List of Paper Type” on page 31
Loading Paper in the Rear Paper Feed
1. Open the feeder guard and pull out the paper support.
User's Guide
Preparing the Printer
28
To Next Page
Loading...
Need help?
General