Epson Workforce Pro WF-C8190 Series - Paper Is Smeared During Automatic 2-Sided Printing; Printed Photos Are Sticky; Images or Photos Are Printed in Unexpected Colors; The Position, Size, or Margins of the Printout Are Incorrect

Paper is Smeared During Automatic 2-Sided Printing
When using the automatic 2-sided printing feature and printing high density data such as images and graphs, set
the print density to lower and the drying time to longer.
Related Information
& “Printer Settings” on page 34
Printed Photos are Sticky
You may be printing on the wrong side of the photo paper. Make sure you are printing on the printable side.
When printing on the wrong side of the photo paper, you need to clean the paper path.
Related Information
& “Cleaning the Paper Path for Ink Smears” on page 101
Images or Photos are Printed in Unexpected Colors
Adjust the color and then print again. e automatic color correction feature uses the standard correction mode in
PhotoEnhance. Try another correction mode in PhotoEnhance by selecting an option other than Auto Correct as
the Scene Correction setting. If the problem continues, use any other color correction feature other than
PhotoEnhance.
Related Information
& “Adjusting the Print Color” on page 58
The Position, Size, or Margins of the Printout Are Incorrect
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Select the appropriate paper size setting.
❏ Adjust the margin setting in the application so that it falls within the printable area.
Related Information
&
“Loading Paper in the Paper Cassette” on page 26
&
“Loading Paper in the Rear Paper Feed” on page 28
&
“Printable Area” on page 131
Printed Characters Are Incorrect or Garbled
❏ Connect the USB cable securely to the printer and the computer.
❏ If there are any paused print jobs, printed characters may be corrupted.
User's Guide
Solving Problems
126