4. Slide the edge guides to the edges of the paper.
5. On the control panel, set the size and type of the paper you loaded in the rear paper feed.
Note:
❏ You can also display the paper size and paper type settings screen by pressing the
button on the control panel.
❏ Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Related Information
& “Paper Handling Precautions” on page 25
& “Available Paper and Capacities” on page 22
& “List of Paper Type” on page 31
& “Loading Envelopes and Precautions” on page 30
& “Loading long papers and Precautions” on page 31
Loading Envelopes and Precautions
Load envelopes in the center of the rear paper feed short edge
rst
with the
ap
facing down, and slide the edge
guides to the edges of the envelopes.
❏ Fan and align the edges of the envelopes before loading. When the stacked envelopes are pued up with air,
press them down to
atten
them before loading.
❏ Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the
printout.
User's Guide
Preparing the Printer
30
To Next Page
Loading...
Need help?
General