Epson Workforce Pro WF-C8190 Series - Ethernet Specifications; Security Protocol; Postscript Level 3 Compatibility

Frequency Range 2.4 GHz
Maximum Radio-Frequency
Power Transmitted
20 dBm (EIRP)
Coordination Modes
Infrastructure, Wi-Fi Direct (Simple AP)
*2
Wireless Securities
*3
WEP (64/128bit), WPA2-PSK (AES)
*4
, WPA2-Enterprise (AES)
*1 IEEE802.11n is only available for the HT20.
*2 Not supported for IEEE 802.11b.
*3 Wi-Fi Direct supports WPA2-PSK (AES) only.
*4 Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specications
Standards
IEEE802.3i (10BASE-T)
*1
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
*1
IEEE802.3az (Energy Ecient Ethernet)
*2
Communication Mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps
Half duplex
Connector RJ-45
*1 Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2 The connected device should comply with IEEE802.3az standards.
Security Protocol
IEEE802.1X
*
IPsec/IP Filtering
SSL/TLS HTTPS Server/Client
IPPS
SMTPS (STARTTLS, SSL/TLS)
SNMPv3
* You need to use a device for connection that complies with IEEE802.1X.
PostScript Level 3 Compatibility
e PostScript used on this printer is compatible with PostScript Level 3.
User's Guide
Appendix
133