Menu Options for Maintenance
Select the menus on the control panel as described below.
Settings > Maintenance
Print Quality Adjustment:
Select this feature if there are any problems with your print outs. You can check for clogged nozzles
and clean the print head if necessary, and then adjust some parameters to improve print quality.
Print Head Nozzle Check:
Select this feature to check if the print head nozzles are clogged. e printer prints a nozzle check
pattern.
Print Head Cleaning:
Select this feature to clean clogged nozzles in the print head.
Ruled Line Alignment:
Select this feature to align vertical lines.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers.
e
printer feeds paper to clean the
internal rollers.
Remove Paper:
Select this feature if there are still some torn pieces of paper inside the printer even aer removing
jammed paper. e printer makes more space between the print head and the surface of the paper to
easily remove the torn pieces of paper.
Maintenance Roller Information:
❏ Maintenance Roller Status
Displays the status of the maintenance rollers for the selected paper cassette.
❏ Reset Maintenance Roller Counter
Aer replacing maintenance rollers, reset the counter for the paper cassette in which you replaced
the maintenance rollers.
Print Quality Adjustment per Paper:
Depending on the paper type, ink feathering is diers. Select this feature if there is banding in the
print outs or misalignment for a specic paper type.
Related Information
& “Adjusting the Print Quality” on page 121
& “Checking and Cleaning the Print Head” on page 99
& “Aligning Ruled Lines” on page 100
& “Adjusting the Print Quality for Each Paper Type” on page 122
& “Cleaning the Paper Path for Ink Smears” on page 101
User's Guide
Preparing the Printer
40
To Next Page
Loading...
Need help?
General