!
Caution:
❏ Make sure you turn o the printer, unplug the power cord from the printer, and disconnect any cables before
starting installation. Otherwise, the power cord may be damaged resulting in re or electric shock.
❏ Lock the casters of the cabinet before starting installation. If the cabinet moves unexpectedly, you may be injured.
❏ When liing the printer, place your hands in the positions shown below. If you li the printer holding other
positions, the printer may fall or you may trap your ngers when placing the printer.
1. Turn o the printer by pressing the
P
button, and then unplug the power cord.
2. Disconnect any connected cables.
Note:
if the optional paper cassette unit has been installed, uninstall it as well.
3.
Remove the output tray.
4. Remove the cabinet from the box, and then remove any protective materials.
User's Guide
Appendix
144
To Next Page
Loading...
Need help?
General