1. Place the originals.
Note:
If you want to scan multiple originals, place all of the originals on the ADF.
2. Select Scan on the home screen.
3.
Select Computer (WSD).
4. Select a computer.
5.
Tap
x
.
Setting Up a WSD Port
is
section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
❏
e
printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
Click Uninstall and start again if the Uninstall screen is displayed.
User's Guide
Scanning
123
To Next Page
Loading...
