Removing Jammed Paper
Follow the on-screen instructions on the printer's control panel to locate and remove the jammed paper including
any torn pieces. e LCD screen displays an animation that shows you how to remove jammed paper.
!
Caution:
Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it
could cause an injury. Be careful not to touch the protruding parts to avoid injury.
c
Important:
Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.
Paper Does Not Feed Correctly
Check the following points, and then take the appropriate actions to solve the problem.
❏ Place the printer on a at surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Do not load more than the maximum number of sheets specied for the paper. When loading plain paper into
the paper cassette, do not load above the line indicated by the
symbol on the edge guide. For thick paper
such as photo paper, do not load above the line indicated by the
symbol on the edge guide. When loading
plain paper into the rear paper feed, do not load above the line indicated by the triangle symbol on the edge
guide.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
❏ If a paper feed problem frequently occurs, feed paper from another paper source.
Related Information
& “Environmental Specications” on page 236
& “Paper Handling Precautions” on page 28
& “Available Paper and Capacities” on page 25
&
“List of Paper Type” on page 34
Paper Jams
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
Related Information
&
“Removing Jammed Paper” on page 195
User's Guide
Solving Problems
195
To Next Page
Loading...
